iPhone 6 Battery Case (4.7 Inches) – 3100mAh External Protective iPhone 6 Charger Case

81ovpOLf5qL._SL1500_

Here are some of the basic Specs:
You should use a 1A power adapter to charge the case
This case outputs 1A to your phone
The case has a capacity of 3100 mAh
The battery type is Li-Polymer
It also has a short circuit and overcharge protection

This is what comes in the package:
Power Case
USB power cable
2 different colored frames. I got a Grey one and a Clear one
A User Manual
and an audio jack cable to let you use all headphones with the case on. It does support mics too

Design:
This case fits my phone very well and provides a nice tight fit. You do need to use the audio jack extender in order to use some Headphones that have a 90 degree bend in the plug like my Sol Republic headphones cable. There are holes at the bottom of the case so you can still use the built-in mic and speaker on the phone with little distortion from plastic getting in the way of them. The matte look of the paint on the case is really nice and provides a slightly better grip from other cases I have used. Having the ability to use different colored frames is really nice especially if you like to change up cases after a while because you can change the cases frame making it look a bit different. There are 4 led lights on the back that light up for each 25 percent the cases battery has.

Performance:
I was able to get one full charge from dead and about a 30 percent charge. To initiate a charge you need to hold the button for 3-4 seconds. This case also feels very protective of my phone because of the ridges the frame has that also covers the front edges of the phone.

I like this case a lot because it is very convenient when you need that extra charge for your phone.

Here is the link to the product on Amazon: Link

2.4A Lightning Car Charger with Built-in Apple 8-Pin Lightning Coiled Cord

61U+0eseGwL._SL1500_

The Nexcon 2.4A Lightning Car Charger feels very durable especially for a universal car charger. This Nexcon Lightning charger features a High Output of 2.4 Amps and has an Apple MFi Certification which is designed to charge Apple devices through a lightening port on your device. There is no impact on your cars radio or bluetooth ability. It also has an extra USB port on it to charge other devices that use USB. The safety overcharge feature is really nice it stops charging your phone or other device when it is completely charged.

Overall this is a really nice charger it provides a nice quick charge when I need it in my car and the plug into the outlet is nice and discreet with little hanging out.

Heres the link to the product on Amazon: Link

Universial Smartphone air vent Car Mount Holder

51Sskrt7lLL._SL1000_

This is the perfect vent holder compared to a phone holder that attaches to the vent from wholesale stores this one is by far the best.
I have use this for a while and it holds very well especially for the large phones that I have tried in it. I have been able to test 3 different phones: an iPhone 6 plus, an iPhone 4, and a Samsung galaxy s3. all these phones fit very well with cases on while some other holders I have had trouble with cases because they were either made specifically for say an iPhone 6 without a case so it wouldn’t fit, but with this holder I have not had that problem.512n1ROGQpL._SL1000_

Having the swivel design is amazing it allows me to see my phone without having to move it. Overall this holder it very nifty it allows you to have freedom while driving and provides a more safe environment because you don’t have to move your phone while driving.

Here is the link to the product on Amazon: Link

Magnetic Cradle-less Universal Car Phone air vent Mount Holder

71zNPHUMqXL._SL1500_

This phone car vent holder is awesome! It is magnetic so you can just stick it on and leave it.
It fits perfectly into my car vent. Having the two different metal plates is perfect the larger plate in meant to go between your phone and the case while the smaller circular metal plate has an adhesive side that sticks to your phone if you wish to not use a case or don’t want to put the metal plate between your phone and the case. The magnet on the holder is very strong and can hold your phone through a decently thick case. One problem I do have is that you only get one adhesive metal plates to stick to your phone and after that if you get a new phone or want to use a different device you would need to get new adhesive to stick it to the device. I can compare this to another car vent holder Nexcon has, it has the same vent “claw” to hold it in place but that one has a clamp like grip on the sides of your phone while this one uses metal and magnets. I feel this one is easier to use just because it takes no time to just stick your phone on the magnet to have it stick while the one that clamps on the sides of your phone does take some work because you have to use both hands to remove it otherwise it would move around while trying to take your phone off.
Overall this is a very nice and convenient car vent phone holder I like it for the simplicity and efficiency, I definitely recommend this to anyone looking for an air vent phone mount.

Here’s the link to the product on Amazon: Link

[Apple MFi Certified] Nexcon Premium Lightning to USB Cable 3.3ft

[Apple MFi Certified] Nexcon Premium Lightning to USB Cable 3.3ft

The build quality of this cable is much better than an Apple cable especially with the protective nylon fiber cloth protecting the cord rather than the rubbery feel from an Apple cable. At about 40 inches this cable is about the same length as a standard Apple cable but with a nice design as I was provided an orange one with a black and white pattern. This cable even fits with all my iPhone 5 cases.
Looking at all the features of this cord it is stylish and durable. I did tie a knot in it once to see how it would hold up and it was surprisingly better than a normal apple cable because I have gotten knots in plain apple chargers and they would lose shape, but this cord easily unties and returns to original length.

Here is the link to the product: Here

Nexcon® Solar Panel Charger 5000mAh Rain-resistant and Dirt/Shockproof Dual USB Port Portable Charger

Nexcon Solar Panel Charger 5000mAh

This is a nice compact 5000 mAh lithium polymer battery charger and feels very sturdy. This item comes with a short Micro USB cable, a micro USB to 40 pin adapter for devices such as an apple iPhone 4/4s and a clip to hold it to a bag or purse.
This charger has 4 blue indicator lights
1 Led: Green means its charging via solar panel. Blue means it is at ~25% power
2 Led: Blue means ~50% power
3 Led: Blue means ~75% power
4 Led: Blue means ~100% power
The light that is flashing indicates the current percent the charger is at while charging a device.
It does say in the manual to double-click the power button to turn on the led flashlight but to actually turn it on you press and hold it.
Pros:
Two USB ports – With the ability to charge two devices at 5 Volts 1 Amp each
Charging indicator lights
Solar charger
Led Flashlight – perfect for the average camper
Outputs 2 Amps at 5 volts when charging one device
Rubber Protective Bumpers – provide shock protection
Covers for the charging port and USB ports
It can be charged using a standard android charger
It is able to charge any of my devices that use a USB port to charge
Lightweight and compact
Cons:
I wish it came with a longer charging cable but that isn’t a very big deal since they are very easy and cheap to get.
The Small Solar panel makes its charging speed slow but it is very effective for keeping it topped off at a full charge

Here is the link: Here